Real recording, 29 Aug 2026 · ClearVü

The brush is already in your recordings. We'll find it.

BrushFinder reads the .RSD sonar log off your Garmin card on Mac or Windows, finds brush piles and standing timber in the ClearVü and SideVü imagery, and hands you waypoints you can drive straight back to.

Every feature, no card required. macOS and Windows.

Depth
15.4ft
Water
84.9°F
Speed
1.5mph
Ping
0/ 6,259

Three minutes over one flat. 6,259 pings. BrushFinder read every one and kept 14.

That is the recording playing above, decoded by the shipping app. An afternoon at survey speed is tens of thousands of pings. Nobody scrubs that frame by frame, so the pile you drove over in November stays buried in the file.

Card in, waypoints out.

Three steps, all on your own machine. Your recordings stay there unless you switch on AI.

29AUG26-1159-01.RSD

Load the recording

Point it at an .RSD file from your Garmin card, or scan the whole card. All four channels decode: ClearVü high and very-high frequency, SideVü port and starboard.

Judge what it found

Every detection is marked on the imagery with its depth and confidence, so you look at the return yourself before you trust it.

<wpt lat="…" lon="…"> <name>Spot 3</name> <desc>15.3 ft · brush</desc> <cmt>Not for navigation</cmt> </wpt>

Export waypoints

Send the keepers out as GPX. Nearby marks collapse into one waypoint per spot, so a pile lands on the plotter as one icon.

Every find, next to the return that made it.

Nothing here is a black box. A mark exists because a patch of imagery earned it, and that patch is right there to judge.

BrushFinder showing the ClearVü down-scan of this recording: a brush field standing off a 15-foot bottom, with the detector's marks drawn on it.

Marked in place

Each detection sits on the imagery at the ping and depth it came from.

Measured off the sonar

Length, height and depth use the recording's own per-ping geometry.

Yours to overrule

Accept or reject any mark. Your verdicts live apart from the detector's output.

A second opinion from AI, when you want one.

Connect your own AI account and BrushFinder can hand the sonar to a model for a second pass, or answer questions about the recording you're looking at. It's optional and off until you turn it on.

  • Ask AI. Ask about the recording on screen. Circle something on the sonar and the model sees what you drew.
  • Kept with the recording. Every recording keeps its own chats, circles included. Start a new one or pick up an old one, and export the conversation when you want it on paper.
  • Your account, your bill. Anthropic (Claude), Google (Gemini) or OpenRouter. You see the cost before anything is sent and can set a monthly limit.
  • Still measured, not guessed. Every depth, height and position comes from BrushFinder's own code. Anything AI found is labelled AI everywhere, including in your GPX.

With AI on, sonar images and trip details, including positions, go straight from your computer to the AI company you chose. Never through us. How it works

A brush pile circled in red on BrushFinder's ClearVü imagery, with Ask AI's answer beside it and its own numbered circle on a smaller clump nearby.
Circle what you want asked about. Ask AI sees the drawing along with the sonar.

Everything between the card and the waypoint.

The detector is one part. The rest is what you need to decide whether a mark is worth the fuel to drive to. Every feature in detail

Map with real coordinates

Every detection placed at a real latitude and longitude from the recording's own GPS track and the beam that saw it. The background map needs an internet connection to load.

Coverage sweep

Polygons of the water your sonar actually saw. The gaps show what you have not looked at yet.

Compare with an earlier trip

New this trip, not found, deeper, shallower, unchanged. "Not found" never claims "gone".

Spots, not clutter

Nearby detections collapse into the one place you would actually drive to.

Measure and Sonar Forensics

Length, height and depth off the imagery, plus a classification and score with its reasoning and stated uncertainty.

My waters

A library of every decoded trip, grouped by the lake it came from, with acreage swept.

Playback

Watch a recording back as it was logged, scrub anywhere, run it at 1×, 2×, 4× or 8×, on down scan or side scan.

Sharper side scan

Side scan drawn from the full detail your unit recorded, at true distances across the swath, and shown upright the way your chartplotter shows it.

Bottom trace and depth profile

A line along the bottom of the down scan, the depth of the whole pass underneath it, and measurements that snap to the bottom.

Six palettes, finer control

Amber, Gray, Blue, Copper, Chirp or Jet, with tone, levels, saturation, smoothing, sharpen and noise controls. Reset all lights up when anything has been changed.

Spot cards

Turn one find into a picture you can send: the sonar around it, with its position, depth and height underneath.

Ask AI, optional

Questions about the recording on screen, answered by the AI account you connect. Off until you turn it on.

Plainly

It is a detector, not an oracle. It will miss things, and it will sometimes point at a weed bed.

Every detection is shown next to the imagery precisely so you can overrule it. BrushFinder narrows a season of recordings to a short list worth driving to. It makes no promise about what is under the boat, and its coordinates are not for navigation.

Buy it once. It stays yours.

No subscription, no seat fees, no asking permission every time you open it. You are buying a tool, not renting access to your own sonar logs.

The trial is the full application for seven days: every channel, every detection, full waypoint export.

$99one time
  • Perpetual licence for macOS and Windows
  • Unlimited recordings, no per-file cost
  • GPX waypoint export
  • Decoding stays on your machine
  • Optional AI on your own account, billed by them
Buy BrushFinder — $99

Secure checkout. Licence key by email. Full pricing

Questions worth answering

Does the licence expire?

No. You buy the version you buy and it keeps working.

What happens when the trial ends?

BrushFinder locks until you buy a licence. Nothing is deleted: your decoded recordings stay on your computer and open again as soon as you activate, and any waypoints you exported are your own GPX files, which keep working in your chartplotter or any other app.

Do you take my recordings?

No. Decoding happens entirely on your machine. The one exception is yours to make: if you switch on AI and connect your own account, sonar images and trip details go straight to that AI company. It's off by default, and the notice you accept first lists exactly what gets sent.

Does the AI cost extra?

Not to us. There's no subscription and no markup. You connect your own account with an AI company and they bill you directly. BrushFinder shows an estimate before each request, the actual cost afterwards, and lets you set a monthly limit. The rest of the app doesn't need AI.

Will it read Humminbird or Lowrance files?

Not today. Garmin .RSD only.

Does it need the internet?

For some things. Opening recordings, scanning and the sonar views all work offline. The map needs internet to load, and so do the AI features. The trial needs an internet connection at least once a day. A bought licence works offline for up to 30 days at a time and re-checks itself the next time you're online. The check sends only what's needed to confirm the licence, never your recordings or locations.

More questions on the pricing page

Try it on water you already know.

Run it on a recording you trust. If it finds the brush pile you know is there, you will know.

Garmin .RSD only. macOS 12 or later, Windows 10 or later (64-bit). About 200 MB. A decoded recording takes several GB of disk.